A mix of fillers, brushes, pots and gloves. Ideal for added to Epoxy for doing small repairs.

SP-High Modulus Colloidal Silica is an agent which is used to control the thixotropy or ?sag? characteristics of a resin system. By adding colloidal silica powder in varying amounts to a resin mix containing the other filler types mentioned, the handling and flow characteristics can be controlled. Relatively small quantities added to a resin mix containing glass bubbles or microballoons will give ...more

SP-High Modulus Glass Bubbles are hollow glass spheres with a more variable particle size than microballoons. Being composed chemically of glass, they are physically harder than microballoons and filled resin mixes are noticeably more difficult to sand. However, glass bubbles produce a more waterproof filler mix and are often used on below-waterline applications on boats. Being significantly less ...more

SP-High Modulus Microballoons are hollow phenolic resin spheres which have a distinctive reddish/brown colouration. This makes them particularly useful for cosmetic fillet joints and fillers in wood construction, as well as structural adhesives for less demanding applications on softer timbers such as cedar. Although not as waterproof as glass bubbles, microballoons are often preferred for their e...more

SP-High Modulus Microfibres are very fine wood-cellulose fibres commonly used to create structural adhesives for bonding both wood and grp. Because any low viscosity resin system is readily absorbed into a porous surface such as wood, an unfilled adhesive may tend to give a ?dry joint?. With their absorbent properties, microfibres can retain a significant quantity of adhesive within a joint and ...more

SP Mini Pumps to fit SP Epoxy 1kg systems.