Viewing 13 items in Swivel Jammers

Allen have spent many hours of research and development with various boatbuilders to perfect the angle and height of the cleat to optimize mainsheet jamming. -Innovative light weight construction. -Dual ball race for maximum efficiency. -Optional click stops limit swivel rotation. -Line snags virtually elminated. Type: High. Fixings: M5 Fixing dimensions: 4 X 20 Max Working Load 350g Weight 28...more

Allen have spent many hours of research and development with various boatbuilders to perfect the angle and height of the cleat to optimize mainsheet jamming. -Innovative light weight construction. -Dual ball race for maximum efficiency. -Optional click stops limit swivel rotation. -Line snags virtually elminated. Type: High. Fixings: M5 Fixing dimensions: 4 X 20 Max Working Load 350g Used on: ...more

Allen have spent many hours of research and development with various boatbuilders to perfect the angle and height of the cleat to optimize mainsheet jamming. -Innovative light weight construction. -Dual ball race for maximum efficiency. -Optional click stops limit swivel rotation. -Line snags virtually elminated. Type: Standard Fixings: M5 Fixing dimensions: 4 X 20 Max Working Load 350g Weight ...more

Allen have spent many hours of research and development with various boatbuilders to perfect the angle and height of the cleat to optimize mainsheet jamming. -Innovative light weight construction. -Dual ball race for maximum efficiency. -Optional click stops limit swivel rotation. -Line snags virtually elminated. Type: Standard Fixings: M5 Fixing dimensions: 4 X 20 Max Working Load 350g Used o...more

Smooth rotation on swivel bases for great performance. Ball bearing mini base using A77 small alloy cam cleat. Used on RS500 VANG and older RS800 jib sheet. Line size 2 - 6mm Height 82mm Hole fixings 3 x 27mm Weight 141.1g

Plain bearing center mainsheet jammer with wire arms. Used on older RS Feva and RS Visions. Can be retro fitted to the RS Feva is you require a cleat. Hole centres 3 x 48mm Fixing size M5 Max Work Load 300kg Weight 360g

Use cam swivel bases when leads must rotate to face the trimmer. Ball bearing swivel bases feature dual rows of Delrin? ball bearings that swivel freely even under high loads. Bases include stand-up springs and a U-adaptor to accept a variety of appropriate blocks. The 144 is the standard configuration with a tall arm. Used on RS700, RS800 etc. Height 146mm Weight 369g Line size 3-12mm Fastening...more

se cam swivel bases when leads must rotate to face the trimmer. Ball bearing swivel bases feature dual rows of Delrin? ball bearings that swivel freely even under high loads. Bases include stand-up springs and a U-adaptor to accept a variety of appropriate blocks. The lowprofile 205 is used when installation is at deck level and when smaller blocks are used. Used on RS200, RS400 etc. Height 114m...more

Ball and Socket Swivel Bases: The ball-and-socket design lets blocks articulate up to 45 degrees and swivel freely. Fits 57 mm and 75 mm Carbo blocks. Bases may be fitted with springs, but blocks won?t hit the deck without them. Used on RS200, RS300 and RS600 where mainsheet bases may not required. Beware does not fit into sam holes as normal mainsheet bases. Height 44mm Weight 85g Diameter 54...more

Specifically designed for the RS800 jib sheet. Allows the jib sheet more easily to swivel round to the crew. Rather than just trying to face the back of the boat.

Swivel cleat bases permit easy cleating and releasing from any angle.Sheave can be relocated to allow the control line to feed from below Comes complete with a 28mm (1 1/4") ball bearing sheave, small ?T-Cleat? and the ?Fast Track? fairlead. Rope ? 2 - 8 mm M.W.L. 150 kg B. L. 300 kg Weight 100 g

The deck swivel articulates to follow the movments of the trimmer. Used for mainsheets on dinghies, keelboats and small yachts. Can also be used on bigger boats if the purchase of the tackle is suffcient. The material used are composite and stainless steel. Horizontal articulation: The angle of the horizontal movement is easily adjusted without apart. Two stops can be fixed in 5 different positio...more

The mast swivel leads the line with full articulation towards the trimmer. The swivel is made of composite 50% glass fibre and 50% polyamide. It is mainly used for cunningham, spinnaker and Gnav etc. The sheave has two optional positions, either the lines coming from above or from below. The mast swivel can be fitted 'upside down' depending on the the desired orientation of the cam cleat. The shea...more