Viewing 15 items in Hull Parts - Helm Area

RS Vareo centreboard case gasket fluff is to be glued into the centreboard case to give the daggerboard a good tight fit, but it is also low friction so the board can still be easily pulled in and out. The item width is 13mm.

Harken front wire fairlead, works with H338 and H423 cleats.

Tired of banging on the mainsheet to uncleat, or watching the cleat let go at just the wrong moment? Harken? ball bearing cam cleats hold lines securely and release instantly for easy, precise trimming. With a downward flick of the wrist, the sheet snaps into the cam?and stays exactly where you want it. Pull up and the cleat immediately releases?even under the highest loads. Smooth teeth grip line...more

Allen nylon spring hook. Normally used with shockcord. Used widely for holding down centreboards and retaining daggerboards. Can also be used for many other functions. Max Rope Size 8mm Length 53mm Weight 5g

Grab rail which fits onto the side of the cockpit on the RS Vareo, RS200, RS400 and K6.

RS Hull Decal

Carbo Ratchets allow sailors to hand-hold loaded lines and offer balance between holding power and controlled easing. Nylon resin sideplates are densely packed with long-glass fibers for a compact block with a high strength-to-weight ratio. Machined aluminum sheaves are Hardkote anodized for strength and corrosion resistance. Eight facets hold line securely. Ball bearings, sheave, and sideplates a...more

Use cam swivel bases when leads must rotate to face the trimmer. Ball bearing swivel bases feature dual rows of Delrin? ball bearings that swivel freely even under high loads. Bases include stand-up springs and a U-adaptor to accept a variety of appropriate blocks. The 144 is the standard configuration with a tall arm. Used on RS700, RS800 etc. Height 146mm Weight 369g Line size 3-12mm Fastening...more

RS Vareo Righting Line Kit. All parts to fit a righting line kit to your boat. The parts include: Small P Clip x 2 Large P Clip x 2 Dome Nut x 2 Pack of M4 Nylocs Pack of M4 x 25mm CSK Machine Screws 5mm PreStretch Rope x 2 5mm Shockcord x 2

RS Vareo Shroud U Bolt New Style, fitted as standard to new boats.

The Easiest Cleat to Release Compact roller action camcleat for easy release of high performance controls and mainsheets Features and Benefits -Development of successful PX model. -Three stage adjustable release spring. -Alloy cam and base surfaces as standard . -Ultra compact low profile design. -Stainless steel rope guides provide wide operating arc. -Integral 6 degree wedge. Rope Range 2mm -...more

Bullseye Fairlead with stainless steel liner Inside diameter 13mm Hole spacing 25mm Fixing hole size 4mm Weight 12g

Low-friction Micro blocks are compact and lightweight. They are ideal for sailboards, smaller dinghies, and lightly loaded control lines on boats of all sizes. Micro block sheaves run exclusively on ball bearing systems for fast trim and release under any load. Delrin? ball bearings and sideplates are UV stabilized with carbon black for maximum protection. Stainless steel sideplates add strength. ...more

The compact 29 mm Carbo is extremely strong. Use our miniature Carbo as a mainsheet block on small dinghies such as the Optimist, or for low-friction control blocks on any size boat. Doubles and triples feature U-Locks to hold the swivel in front/side position, or to let it spin freely. The triple?s compact cam arm supports high-load purchases of 5:1 or 6:1. The line-shedding cheek block features ...more

RS Vareo Toe Strap Set, new style full length version.