Viewing 13 items in Hull Parts - Helm Area

Carbo AirBlocks? are 60% stronger and 30% lighter than Harken Classic blocks. Use the 40 mm Carbo for jib and mainsheet systems on high-performance dinghies and for loaded control lines on small keelboats. The nylon-resin sideplates are densely packed with long-glass fibers for a compact block with a high strength-to-weight ratio. Sheaves spin on high-load ball bearings with fitted races for low-f...more

Carbo Ratchets allow sailors to hand-hold loaded lines and offer balance between holding power and controlled easing. Nylon resin sideplates are densely packed with long-glass fibers for a compact block with a high strength-to-weight ratio. Machined aluminum sheaves are Hardkote anodized for strength and corrosion resistance. Eight facets hold line securely. Ball bearings, sheave, and sideplates a...more

A 4 holed hevy duty deck plate. Used on RS600, RS700 and RS800 as mainsheet bridle deck plate.

Use cam swivel bases when leads must rotate to face the trimmer. Ball bearing swivel bases feature dual rows of Delrin? ball bearings that swivel freely even under high loads. Bases include stand-up springs and a U-adaptor to accept a variety of appropriate blocks. The 144 is the standard configuration with a tall arm. Used on RS700, RS800 etc. Height 146mm Weight 369g Line size 3-12mm Fastening...more

RS600 and RS700 rear wing U bolt.

RS700 New Style 6mm Shroud U Bolt, specially reinforced for the RS700.

Allen cam cleats have had over 50 years of meticulous R&D to perfect their design. Alloy the jaw profile optimizes rope entry and exit for smooth cleating and uncleating, whilst double coil springs and ball bearing technology give consistent cam action. The addition of the ultra-prolead with optional wire reinforcement enhances cleating angles for superior performance and longevity. For ultra-h...more

Allen cleat stainless steel front fairlead, works with A77 and A677 cleats.

Allen wedge kit, works with A77 and A677 cleats.

The Carbo Ratchamatic? is a load-sensing ratchet block that rolls freely in both directions under low loads and automatically engages the ratchet as loads increase. Shifting between ratchet and light-air modes is seamless. Unloaded main and jib sheets run out freely during mark roundings and asymmetrical spinnakers free instantly during jibes. Ratchet engagement may be adjusted to a higher or lowe...more

Tired of banging on the mainsheet to uncleat, or watching the cleat let go at just the wrong moment? Harken? ball bearing cam cleats hold lines securely and release instantly for easy, precise trimming. With a downward flick of the wrist, the sheet snaps into the cam?and stays exactly where you want it. Pull up and the cleat immediately releases?even under the highest loads. Smooth teeth grip line...more

Stainless steel lined through deck bush. Inside diameter 13mm Outside diameter 16mm Weight 2g

RS600, RS700 and RS800 wing end plug. Which attaches the wing to the hull.