Viewing 12 items in Hull Parts - Helm Area

The 16 mm is Harken?s? smallest block. It is perfect for small synthetic control lines found on high-tech dinghies. The patented bearing system uses stainless steel balls in a captive grooved race and has a 250 lb (113 kg) safe working load the highest on the market compared to similarly sized blocks. The 442 uses a spacer and the 404 uses an O-ring to keep the line in the sheave during intermitte...more

Carbo AirBlocks? are 60% stronger and 30% lighter than Harken Classic blocks. Use the 40 mm Carbo for jib and mainsheet systems on high-performance dinghies and for loaded control lines on small keelboats. The nylon-resin sideplates are densely packed with long-glass fibers for a compact block with a high strength-to-weight ratio. Sheaves spin on high-load ball bearings with fitted races for low-f...more

RS600, RS700 and RS800 3kg corrector weight. Used to make all boats equal when racing. See class rules to see if you need any.

Tired of banging on the mainsheet to uncleat, or watching the cleat let go at just the wrong moment? Harken? ball bearing cam cleats hold lines securely and release instantly for easy, precise trimming. With a downward flick of the wrist, the sheet snaps into the cam?and stays exactly where you want it. Pull up and the cleat immediately releases?even under the highest loads. Smooth teeth grip line...more

Harken front fairlead, works with H338 and H423 cleats.

RS600, RS700 and RS800 standard lead track. Which takes 2 leads weights.

RS600, RS700 and RS800 corrector weight track end stop.

Tired of banging on the mainsheet to uncleat, or watching the cleat let go at just the wrong moment? Harken? ball bearing cam cleats hold lines securely and release instantly for easy, precise trimming. With a downward flick of the wrist, the sheet snaps into the cam?and stays exactly where you want it. Pull up and the cleat immediately releases?even under the highest loads. Smooth teeth grip line...more

Carbo Ratchets allow sailors to hand-hold loaded lines and offer balance between holding power and controlled easing. Nylon resin sideplates are densely packed with long-glass fibers for a compact block with a high strength-to-weight ratio. Machined aluminum sheaves are Hardkote anodized for strength and corrosion resistance. Eight facets hold line securely. Ball bearings, sheave, and sideplates a...more

A 4 holed hevy duty deck plate. Used on RS600, RS700 and RS800 as mainsheet bridle deck plate.

Use cam swivel bases when leads must rotate to face the trimmer. Ball bearing swivel bases feature dual rows of Delrin? ball bearings that swivel freely even under high loads. Bases include stand-up springs and a U-adaptor to accept a variety of appropriate blocks. The 144 is the standard configuration with a tall arm. Used on RS700, RS800 etc. Height 146mm Weight 369g Line size 3-12mm Fastening...more

Open Base Fairlead Inside diameter 9mm Hole spacing 23mm Fixing hole size 4mm Weight 6g